SAFE-LOCK TOOL PULL-OUT PROTECTION
ROUGHING APPLICATION IN THE PACKING MACHINE INDUSTRY
Problem
![© HAIMER © HAIMER](/shop/catalog/product/1736/image-thumb__1736__imageText/Anwendungsbeispiel_Safelock.png 1x, /shop/catalog/product/1736/image-thumb__1736__imageText/Anwendungsbeispiel_Safelock@2x.png 2x)
- Only Weldon holders could be used
- High tool wear on one flute (Tool breakout on the opposite side of the Weldon flat)
TARGET
- Increase of tool life by usage of high precision tool holding instead of Weldon
APPLICATION:
CONTOUR MILLING
Material: | Steel |
---|---|
Cutting tool: | HPC solid carbide cutter with variable flutes Ø = 20 mm, Z=4 |
APPLICATION PARAMETERS:
Cutting depth: | axial (ap) = 0,75xD; radial (ae) = 10 mm |
---|---|
Cutting speed (vc): | 180 m/min |
Feed rate/flute (fz): | 0,07 mm/U |
Result
![© HAIMER © HAIMER](/shop/catalog/product/1735/image-thumb__1735__imageText/2-AnwendungsSafeLock.jpg 1x, /shop/catalog/product/1735/image-thumb__1735__imageText/2-AnwendungsSafeLock@2x.jpg 2x)
This comparison shows the wear characteristics of the cutting tools at various machining times. Of note is that, in the case of Safe-Lock, even at double the machining time, wear is less prevalent and more´controlled than for Weldon - with 100% protection against pullout.
APPLICATION EXAMPLE AS PDF DOWNLOAD:
![](/shop/catalog/downloads/preview/2103/image-thumb__2103__innovationTeaser/safe%20lock%20schruppanwendung%20in%20der%20verpackungsmaschinenindustrie.jpg)
Safe-Lock
Roughing application in the packaging machine industry